Click image to view full size image
Double Layer Roll Forming Machine for Corrugated Roof and IBR Roof in One Line
Application:
Double Layer Roll Forming Machine can separate produce corrugated roof and IBR roof in one line or similar two profiles.
The products are widely used in building the steel-structure large-scale warehouse, plants, supermarkets, shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of greenhouses.
Advantage:
available for two profiles roof panel shared one frame, save the cost.
1) Used to produce different roof panels and wall panels
2) Produced panels have such advantages as below:
a) Fine profile
b) Attractive color
c) Agile connecting
d) Slightly curved
3) dual-level roll forming machine
4) We can design and manufacture different type of it to hit your particular profiles
Technical Parameters:
| Material Spec: | Colored Steel Sheet; Galvanized Steel Sheet |
| Thickness of Coil Sheet: | 0.3-0.8mm |
| Main Motor Power: | 5.5KW |
| Forming Speed: | 15-18M/MIN |
| Hydraulic Station Power: | 5.5 KW |
| Quantity of Stands: | 17 Stands |
| Hydraulic Pressure: | 10-12Mpa |
| Controlling System: | PLC |
| Index Error of Length: | 10M ± 2mm |
| Total Weight: | about 80000KGS |
| Voltage: | 380V 3 Phase 60Hz or At Buyers Requirement |
Consists:
Automatically cut to length, PLC control, alternating Current Frequency Conversion.
a. 5 Ton Mechanical uncoiler
b. guiding and feeding device
c. roll forming machine
d. run out table
e. PLC controller
f. hydraulic post-cutting equipment
g. electrical control system
h. hydraulic system, etc.
Machine photo for refer:
